|1.1 FRAME: The top and vertical rails of the frame are manufactured
from 60 x 40 x 2mm rectangular section, the bottom rail member 100 x60
x 2.5mm rectangular section.
1.2 BARS: The bars are welded into the frame at 150c/c. For bar diam see below table.
1.3 WHEELS: Cast iron supporting wheels with dust proof roller bearings fitted inside the bottom horizontal member. Two wheels per gate for widths from 4000 to 7000 and four wheels per gate for widths from 8000 to 14000.
1.4 RAZOR COMB: Optional for the 1800 high gates and standard on all the heights from 2000 to 3000 high.
|2. Gate Type|
2.1.5 OPERATING CONTROLS: Hand held remote controlled
transmitters. Push button control from internal security station. Manually
operated key switch for pedestrian traffic, externally mounted. Photo
cell opening mechanism also available.
2.2 Swing Gates
GATE: Hinged to mild steel post.
2.2.2 PINTLE HINGED GATE:
2.2.3 MOTORS: 220 Volt single phase 50 cycle 0.37kW per